LOGO!MAT Walk-On - Series: Diverter and Junction Unit


diverter-junctionThe LOGO!MAT Diverters and LOGO!MAT Junctions are used in the LOGO!MAT Walk-On Roller Conveyor to divide or merge conveyor segments. Including fully walkable covers, made from wood or steel are the only difference between the L - Series and the Walk-On Component.

 
 
 

 

 

LOGO!MAT Walk-On Diverter Unit


Our innovative Diverter technique enables you to connect different conveyor zones effectively and allows pallets to turn off and on to another perpendicular conveyor track. The pneumatically driven pivoting arm swings into the conveyor track and directs the pallet on to an adjoining track. In the case that the pallet should not turn, the diverter arm stays in the closed position or moves out of the conveyor track so that the pallet is able to continue straight. The pneumatic actuation is no issue in regards to pinch points since the Walk-On Conveyor Track is completely covered.

In the area of the Diverter, fixed driven rollers are used to make sure that the pallet passes the Diverter. The spaces between these driven rollers are filled in with protective covers for safety reasons. The speed of the Diverter arm is adjustable with air flow or a frequency converter.

The LOGO!MAT Walk-On Diverter can also be fairly easily installed in the future if there is a need to expand the conveyor line.

LOGO!MAT Walk-On Junction Unit


Our innovative Junction enables you to connect different conveyor zones effectively and allows merging two perpendicular conveyor tracks. A LOGO!MAT Junction consists of a free pivoting arm which swings into the conveyor track and directs the pallet on to an adjoining track. It also allows a pallet to continue straight in the closed position. It gets operated by the pallet itself and doesn’t need to be powered or controlled.

To ensure that the pallet safely passes the Junction the rollers in the Junction areas are fixed driven rollers. The area doesn't build up any pitch points because the swing is covered by the walkable covers.

The Junction can also be fairly easily installed in the future if there is a need to expand a conveyor line.

 

Medien